John Lewis JLBIDW1202 Manuel d'utilisateur télécharger pdf (Page 8)

Salt

The indicator comes on when the

salt has run out.

1)

The salt indicator can remain on

for a few hours after that salt has

been replenished (assuming the

appliance remains switched on).

The operation of the appliance is

not affected.

Rinse aid

The indicator comes on when the

rinse aid has run out.

1)

Multi tab

The indicator comes on when you

activate the Multi tab function.

1) The salt and rinse aid indicators are never on while a

washing programme is running even if filling with salt

and/or rinse aid is necessary.

Function buttons

The following operations can be done with

these buttons:

• The electronic setting of the water

softener.

• The cancellation of a washing programme.

• The cancellation of the delay start.

• The activation or deactivation of the Multi

tab function.

• The activation or deactivation of the rinse

aid dispenser (only with the Multi tab

function activated).

• Activation or deactivation of the acoustic

signals.

Setting mode

The appliance must be in setting

mode for these operations:

• To start a washing programme.

• To start a delay start.

• To adjust electronically the level of the

water softener.

• To activate or deactivate the Multi tab

function.

• To activate or deactivate the rinse aid

dispenser (only with the Multi tab function

activated).

• To activate or deactivate the acoustic

signals.

Switch on the appliance. The

appliance is in setting mode when:

• All the programme indicators come on.

Switch on the appliance. The

appliance is not in setting mode when:

• Only one programme indicator comes on.

• The display shows the time of the washing

programme or of the delay start.

– Cancel the programme or the delay

start to go back to the setting mode.

Refer to 'Select and start a washing

programme'.

Acoustic signals

The acoustic signals indicate:

• The electronic setting of the water

softener.

• The end of the washing programme.

• The intervention of an alarm code related

to a malfunction.

Factory setting: acoustic signals activated.

It is possible to deactivate the audible

signals, using the function buttons on the

control panel.

Deactivating the acoustic signals

1. Switch on the appliance. Make sure that

the appliance is in setting mode.

2.

Press and hold function button (B) and

function button (C) simultaneously until

the indicators of function buttons (A),

(B) and (C) start to flash.

3.

Release function button (B) and function

button (C).

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire