John Lewis JLBIDW1202 Manuel d'utilisateur télécharger pdf (Page 10)

Consumption values

Programme Duration

(minute)

Energy

(kWh)

Water

(litre)

70° Intensive 80 - 90 1.6 - 1.8 22 - 24

Automatic 90 - 130 1.1 - 1.7 12 - 23

Quick 30 0.9 9

50° Economy 150 - 160 1.0 - 1.1 13 - 15

Rinse hold 12 0.1 4

The consumption values are intended

as a guide. They depend on the

pressure and the temperature of the

water, on the variations of the power

supply and on the quantity of dishes.

When the appliance is first

installed

Before using the appliance for the first time:

• Ensure that the electrical and water

connections comply with the installation

instructions

• Remove all packaging from inside the

appliance.

• Check if the factory set of the water

softener complies with the water

hardness in your area. If not, adjust the

level of the water softener.

• Pour 1 litre of water into the salt

container and then fill with dishwasher

salt.

• Fill the rinse aid dispenser.

• Open the water tap.

• Processing residues can remain in the

appliance. To remove these residues,

start a washing programme without

loading the baskets and without using

detergent.

If you want to use combi detergent

tablets (e.g. 3 in 1, 4 in 1, 5 in 1) set

the Multi tab function. Refer to 'Multi

tab function'.

The water softener

The appliance is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water

hardness is measured in equivalent scales,

Clarke degrees, French degrees (°TH) and

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire