John Lewis JLBIDW1202 Manuel d'utilisateur télécharger pdf (Page 12)

4.

Press function button (A), the indicators

of function buttons (B) and (C) go off

while the indicator of function button

(A) continues to flash.

• The acoustic signals sound.

• The display shows the current level

(e.g.

displayed and you hear 5

acoustic signals = level 5 ).

5. To change the level, go on pressing

function button (A) until the display

shows the required level. Refer to the

water hardness table.

6. Switch off the appliance to confirm the

operation.

Filling with salt

Caution! Only use salt specifically

designed for dishwasher use. All

other types of salt, especially table

salt, will damage the water softener.

Only fill with salt just before starting

one of the complete washing

programmes. This will prevent any

grains of salt or salty water, which

may have been spilt, to remain on the

bottom of the appliance for any

period of time and cause corrosion.

1. Open the appliance door and remove

the lower basket.

2. Unscrew the cap of the salt container by

turning it anticlockwise.

3. Pour 1 litre of water into the container

(this is necessary only before filling with

salt for the first time).

4. Using the funnel provided, pour in the

salt until the container is full.

5. Screw on the cap of the salt container by

turning it clockwise until it stops with a

click. Make sure that there is no trace of

salt on the screw thread or on the

gasket.

Do not worry if water overflows

from the unit when filling with salt,

this is quite normal.

Filling with rinse aid

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Commentaires sur ces manuels

Pas de commentaire