John Lewis JLBIIH615 Manuel d'utilisateur télécharger pdf (Page 12)

First set the heat setting for one of the cooking

zones.

To activate the function for left / right

cooking zones: touch / . To set or

change the heat setting touch one of the left /

right control sensors.

To deactivate the function: touch /

. The cooking zones operate independently.

When you use only one cooking zone of the

pair we recommend that you use the rear

cooking zone. Also when you use large

cookware we recommend that you put it near

to the rear cooking zone.

Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the zone

operates on the highest setting in the beginning

and then continues to cook at the desired

heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on). Immediately

touch a desired heat setting. After 3 seconds

comes on.

To deactivate the function: change the heat

setting.

Power function

This function makes more power available to

the induction cooking zones. The function can

be activated for the induction cooking zone only

for a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the heat

setting.

Timer

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.

First set the heat setting for the cooking zone

then set the function.

To set the cooking zone: touch

again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the

time: touch or of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.

To see the remaining time: set the cooking

zone with . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.

To deactivate the function: set the cooking

zone with

and touch . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end,

the sound operates and 00 flashes.

The cooking zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking zones

do not operate. The heat setting display shows

.

To activate the function: touch . Touch

or of the timer to set the time. When the

Hob User Manual

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Commentaires sur ces manuels

Pas de commentaire